Griffco-valve High-Pressure Manuel d'utilisateur télécharger pdf

Griffco Valve Inc.

6010 N. Bailey Ave., Suite 1B

Amherst, NY 14226

Phone: 1 716 835-0891

Fax: 1 716 835-0893

HIGH PRESSURE

INJECTION VALVE

Installation and Operation Manual

Installation Instructions:

1. Install the Injection Valve at the injection port so that the quill tip 45 deg inclined edge is opposite the flow

in the pipe. This is achieved by tightening the valve all the way, until the arrow on the valve body faces

the operator.

2. Use PTFE tape or pipe dope to prevent potential leaks.

3. Do not over tighten.

4. Connect chemical feed line to opposite end. It is recommended to install a union connector for ease of

maintenance.

Operation:

Griffco injection valves are threaded into a process pipe or tank to deliver chemical to a desired application point.

The integrated quill keeps the chemical off the wall of the tank or pipe and will ensure better mixing of the chemical

with the process fluid. This is enhanced by the 45

° angle at the quill tip. The ball check in the valve functions as a

positive shut-off to ensure the process fluid does not go back up the chemical line.

www.griffcovalve.com CALL 1 - 800 - GRIFFCO Bulletin # INS-IVQ-5-2014

Flow

1 2

Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 Phone: 1 716 835-0891 Fax: 1 716 835-0893 HIGH PRESSUREINJECTION VALVEInstal

Technical Data: Model : IVQ - Injection Quill (non-serviceable check valve) Size: 1/2" Connections: 1/2" NPT Double Thread (Male) Maxim

Plus de documents pour Équipement Griffco-valve High-Pressure

Pas de commentaire